AE900 Tower Rack SERIES

/en /por

SERIE AE 9001 KVA – 10 KVA I/I

TECHNICAL SPECIFICATIONS AND STANDARD EQUIPMENT

– Using high reliable parallel redundancy technology N+1.
– True on-line design, pure sine wave output without pollution.
– Adopts the high frequency and IGBT technology.
– Intelligent CPU design.
– PFC =0,98.
– Zero transfer time.
– Local and remote monitor capability with RS232 or USB port and compatible with SNMP.
– Self-diagnosis and short circuit protection design.

Check Sheet

AE200 LCD SERIES

/en /por

SERIE AE200500–1500 VA

TECHNICAL SPECIFICATIONS AND STANDARD EQUIPMENT
Microprocessor-based digital control.
Wide input voltage and frequency range.
AVR.
Automatically output frequency.
LCD display and audible alarm features.
Self-diagnosis on start-up.
Overvoltages, short circuits and overload protection.
Cut off when no load connected.
Intelligent battery management. Battery capacity and load capacity display.
RS232/USB (optional).

Check Sheet

CU SERIES

/en /por

CU10–50 KVAR/400 V 50 Hz

For networks with high harmonic distortion
> 60% THD in current
The transferring of the resonance frequency to a frequency value
lower than that of the predominant harmonic is achieved by adding
an inductance in parallel to the capacitor.
The using of Aener reactors allows to reduce sensibly the harmonics in
the installation for both linear loads and in the sources (transformers
and generators). With the installation of capacitor banks equipped
with harmonic filters the harmonics circulate between the generating
loads and the capacitor bank eliminating, this way, the harmonics
from the rest of the installation. This is the reason behind the
importance of filtering the harmonics as close as possible to the
generating loads.

TECHNICAL SPECIFICATIONS
Rated voltage: 400 V 50 Hz.
Detuning factor: 7%.
Resonance frequency: 189 Hz.
Inductance tolerance: ± 3%.
Linearity: 1,75 In.
Test voltage: 3.000 V.
Thermal isolation: Class F / 155°C.
Maximum ambient temperature: + 45°C.
Protection level: IP00.

Check Sheet